How To Plan And Install A Home Lawn Sprinkler System

The installation of a lawn sprinkler system is done according to the manufacturer’s flow rate directions and water pressure. Dividing the system into various circuits is necessary to optimize its performance. Planning is the first step of a successful process and is followed by actualizing and installing equipment.

Planning For The Sprinkler System

Prior planning is recommended before digging holes and laying pipes. Make an effort to contact local utility companies who send a team of experts to mark any underground power lines. Hire the services of a sprinkler Denver-based professional with the required certificates and perform proper research on the local regulations on water usage.

Drawing Up An Irrigation Plan

A professional team begins by visiting the home and creating diagrams of the areas to be covered by the irrigation system. The completion of the exterior coverage areas necessitates the development of watering zones in the plan. A zone coverage map displays how the garden is irrigated, and the homeowner can scrutinize it to establish any defects.

• The expert draws the plan to scale, noting the location of the trees, flower beds, and other vegetation. Avoiding hardscapes like driveways and walkways is essential to minimize digging trenches.
• Locate on the map the area where the PVC pipe and control box are best suited

Take into consideration obstructions such as slopes and note the location of the sprinkler heads. Different zones have different water requirements and are designated with consideration in mind. Use standard sprinklers for areas covered with grass and apply drip irrigation methods for a vegetable garden.

Determine Water Pressure And Flow Rate

Consult a plumber who has the expertise to determine the correct pipes. A pressure gauge attached to an outside faucet tells the homeowner the water pressure. Determine the flow rate by recording the amount of time it takes to fill a gallon container. Establish the number of gallons filled per hour to obtain the rate.

Installation Process

Mark The Pipe And Sprinkler Heads

Suitable water distribution in proper channels is essential. Consult and seek the services of a professional landscaper to aid in this endeavor. Mark the various locations of the sprinklers.

Dig Trenches

Create enough space to prevent pipes from being exposed in the yard. Hire a professional to use a power trencher to save time.

Connect The Water System

Hook the sprinkler system to the water supply. Shut the mains entirely and connect the system directly to a spigot. A plumber comes in handy to connect to the main water line.

Installation Of Valve Manifold And Laying Of Pipes

A hole that is big enough provides room for the valve manifold box. Afterward, the water supply is attached to one end, and PVC pipes and sprinkler heads are laid along the trenches.

Assembly Of The Pieces

Connect sprinkler locations and assemble pipes piece by piece. Flush the water pipes to remove any dirt which may have accumulated. Close each valve before accessing the next, and upon flushing the entire system, sprinkler heads are attached.

Connecting The Wiring

Place the programmable timer and wiring of the connection box. Hire the services of an electrician to attach the electrical wiring system to the timer. Set the timer to comply with the desired irrigation plan. Once this process is complete, testing of the system follows to ensure smooth running and filling of trenches is done.

Sprinkler systems are essential in the long run, and their cost-effective nature helps save a considerable number of hours for lawn maintenance. An efficient system saves a substantial volume of water and keeps the surroundings greener and healthy.