Keeping your business protected. from fire is an important, part of setting up your business location. An annual inspection will be done by a fire inspector, from the local fire department to ensure, you are complying with the guidelines for safety. Take the time to check the following items. Before the inspection occurs, make sure you are up to code.
Sprinklers
A crucial piece of the installation of fire code San Diego CA is sprinklers. To keep them up to code, make sure you have 18 inches of space between the sprinkler heads and any storage down below. The sprinkler system should be inspected yearly.
Alarms
Smoke detectors are also needed. to be checked yearly. Batteries need to be replaced in the non-functional, alarms you come across. Detectors can last up to ten years. before new alarms are required.
Exits
An inspector will check. All exit areas to see if they. are clearly visible and easy to open. A key should not have to be used to get outside of the business building. Any fire doors need to be self-closing.
Electrical
The circuit board in your office. Needs to be clearly labeled, and have 30 inches of clearance in front of it. If extension cords are used, they should be properly grounded, used for temporary purposes, and used for small items.
Fire Extinguishers
Any fire extinguishers need. To be visible and easily accessible with a height. No more than five feet off the ground. They need to meet minimum ratings. for your environment and be inspected yearly.
Lighting
All exits should be brightly illuminated. To ensure everyone knows, the path to follow in an emergency situation. Emergency lighting, units, and exit signs need to have batteries. Replaced to ensure proper operation.
When you take the time, to check these areas, the fire code inspection will go smoothly, so you can continue running your business.
