Windows Error 0xc0000185: Avail 5 Unique Methods To Resolve

Many people prefer Windows 10 Operating System because of its intuitive interface. Sometimes, however, users may encounter an irritating error, error code 0xc0000185.

This error code is accompanied by an error notification. It displays the message “The boot configuration data of your system is missing/contains errors.”

This error code is displayed during Windows 10’s boot process. This error prevents users from starting the Windows session.

Users are prompted to repair their device using the Windows installation media whenever this error occurs.

You may be experiencing the same problems and are looking for effective solutions. This article will help you to eliminate the error quickly.

Possible Causes of Error 0xc0000185

These Windows errors can occur for many reasons. We will only mention the most important ones in this section. Let’s take a look at some of the main causes of error code 0.xc0000185.

• This error code may be caused by a corrupted or faulty disk drive.
• Windows error code: 0xc0000185 may occur due to a loose connection between your device’s hard drive and your device.
• Because of missing startup files, the device cannot access Windows partitions. This could be a major cause of the problem.

Let’s identify the root cause and then move on to the next section. Here you will find all possible solutions.

Steps to Fix Windows Error Codes 0xc0000185

You are now aware of the main causes of Windows errors. You must fix this error immediately to avoid losing your work, regardless of the cause. Learn the best ways to solve your problems on the move.

Method 1: Diagnose the issue properly

Before you begin troubleshooting the error you need to run some tests to determine the exact problem with your computer’s hardware. Follow these steps to do this:

1. For a few seconds, turn off your HP PC and press the power button.
2. Restart your computer by pressing the power button. To get to the HP Startup menu, hit Esc.
3. To start System Diagnostics, press the F2 key and follow the prompts to run Quick System Test. Navigate to System Test, then choose Quick test.
4. Check to see if there are any hardware problems. If so, you can perform HDD and RAM check checks to determine the problem.

You should immediately contact HP Support if you receive any error. If you are unable to resolve Windows Error Code (0xc0000185) on your HP computer, but there is nothing wrong, you can still contact HP Support.

1. Open the HP Startup Menu, as described above. Follow the steps above and click F11 when you reach the startup menu.
2. There are now a few System Recovery Options available on your screen. Choose System Restore from all the options and choose the restore point that was used before the error occurred.

*Note: If the recovery partition on your HP computer is corrupted or deleted, you cannot open the System Recovery Option. You can follow the above process if your HP PC has Recovery Partitions.

Method 2: Use Windows 10 Installation Media

Windows Error Code (0xc0000185) on HP PC can easily be fixed using Windows 10 Install Media. You must be careful as the process can be quite complex and could cause more damage. Follow the steps below:

1. Turn on your HP Laptop. Once it turns on, open the CD/DVD ROM. Reboot your computer by inserting Windows 10 Installation Media into the CDROM.
2. After you have installed Windows 10 on your HP PC, the screen will display the message “Press any key for booting from CD”. Follow the prompts, i.e. click on any key on the keyboard.
3. Next, choose the keyboard type you prefer and set the time.
4. Click the Repair Your Computer button in the lower-left corner.
5. Choose Troubleshoot on the Choose an Option screen.
6. Click on Advanced Options under Troubleshoot Menu, then choose Automatic Repair.
7. Choose the OS that you’re running, and Windows will scan and fix any errors in your HP PC.
8. Once the process is complete, remove the Windows 10 Installation Media from your HP Laptop.
9. Reboot your device and see if it is fixed.

That’s all. We hope that you are able to fix Windows Error Code 0.c0000185. If the error persists or you have any questions about your HP Computer, please contact us. No matter if it’s a minor or major issue, we can help you resolve them.

Solution 1: Use Windows 10 Installation Media

This error can be easily fixed with the Windows 10 Install Media. This can be a DVD, or a USB flash disk containing Windows 10 OS files. You will need to create another DVD to store Windows 10 Installation Media.

• First, insert the USB flash or DVD, and then reboot your device. Next, choose the Language. Once you have selected the Language, click on the Next button in the menu.

• Next, locate the “Repair your Computer” option from that menu and right-click. Next, choose Windows 10 and open the Command Prompt window.

• After the Command Prompt window has opened, enter the commands below and hit the Enter key after each command.

First Instruction: bootrec /fixMBR

Second Instruction: bootrec /fixBoot

Third Instruction: bootrec /rebuildBCD

Once you have completed all of the commands successfully, restart your device. Check if the problem persists after your device is restarted.

Solution 2 – Inspect Faulty Equipment

An error code of 0xc0000185 may be caused by a defective device that is connected to your device. If one of your main components is damaged or corrupted, this can also occur. This can prevent Windows from properly booting.

If Windows is displaying an error, you will need to take out all equipment that is connected to your device, such as the keyboard and mouse. Now, boot your device.

If the booting process succeeds after you have removed all equipment, then you can confirm that the error was caused by external devices.

Also, it is possible that internal components of your device, such as the hard drive or USB, are damaged. This can prevent your device from properly booting. This can be caused by a bad hard drive.

Solution 3 – Remove Recently Added App

If you discover this error after installing ceratin apps, it is recommended that you remove all of the previously added applications. This can sometimes be caused by incompatible applications and programs.

Follow the steps below to achieve this goal.

Step 1 : First, navigate to the Start menu. Navigate to Settings. After the Settings window has opened, click on “Apps and Features”, located in the left pane.

Step 2 Next, select all recently installed programs and click the Uninstall button in the menu.

Step 3: Click the OK button to confirm the process. Repeat the process for any incompatible applications. After the process is completed, restart your device to verify that the issue has been resolved.

Solution 4 – Run the CHKDSK Scans

First, press the Windows Logo key. Next, write “Command Prompt” in it. Hit the Enter key to select the “Run as administrator” option. After the Command Prompt is invoked in Admin mode write ” Chkdsk/ R” then hit the Enter key. Finally, reboot your device. Check if the problem has been solved by rebooting your device.

Solution 5 – Use the System Restore Process

If you have tried all of the above, but failed to solve the problem, this is the last resort.

This section contains the System Restore procedure. System Restore is basically a process that removes all programs, updates, and applications, which were recently installed on your system.

Dism error 87 windows 7

This could help you return your device back to the point it was when everything worked properly.

If you don’t know how to use System Restore, you can still follow the steps below.

Step 1 First, insert the DVD/USB drive and then reboot the device. Next, select Troubleshoot from the section “Choose an Option”. Next, click on the Advanced Options.

Step 2 Choose either “Reset The System” or “System Restore”. To confirm, click the OK button.

Follow the prompts and follow the instructions to complete the process. After the process is completed, restart your device to allow the changes to take effect.

The Whole

We have listed the main causes of this error and the best ways to fix it in the section above. These methods can be used to achieve the best results.

If the error code of 0xc0000185 persists despite following these steps, you can post your questions in the comments section below.

You can also contact an expert to get the best solution.